Types of screwdriver bits | Everything you need to know about

Screwdrivers are one of the basic tools that we can find in all toolboxes. The function of these tools is to screw or unscrew different types of screws with different types of heads.

The screwdriver is a mechanical tool and basically what it does is to transmit the turn that we make with our wrist to the tip of the screw. One of the things that we have to take into account when choosing our screwdriver well is the type of head that we want to be tighten. In the market we can find a wide variety of screws with different heads and if we select a screwdriver with a tip that does not fit the screw head, we will not be able to do the job properly. We are going to explain the wide variety of screwdriver bits on the market.

tipos de puntas de destornillador bianditz

PH Screwdriver tip:

PH bits are one of the most used bit on the market and we can find them in a big majority of screws on a day-to-day basis. We can find this type of screws from furniture that we can buy in department stores to small electrical items.

Within the range of PH screwdriver bits we can find different sizes and lengths. In the range of Bianditz professional screwdriver bits you can find the following sizes: PH-0, PH-1, PH-2, PH-3 and PH-4 with lengths of 25mm, 50mm, 75mm, 100mm or 150mm depending on the model.

PZ Screwdriver tip:

The PZ screwdrivers are another of the great known especially in the European market. It must be said that this type of screwdriver is usually confused with the PH because of its star shape, but the difference between the two is that the PZ has 4 additional guides for a better grip. It is a type of screwdriver tip widely used in the world of carpentry.

Within the range of PZ screwdriver bits we can find the same sizes and lengths as in the PH: PZ-0, PZ-1, PZ-2, PZ-3 and PZ-4 with lengths of 25mm, 50mm, 75mm, 100mm and 150mm.

Flat Screwdriver tip:

Punta destornillador recta

The straight tip screwdriver is another of the best known on the market and we can differentiate it by its flat tip shape. It must be said that these bits are not suitable for electric screwdrivers because the tip wears out quite quickly.

Within the range of Bianditz professional screwdriver bits we can find the following sizes: 3×0.5, 4×0.5, 4.5×0.6, 5.5×0.8, 5.5×1, 6.35×1, 6.5×1.2, 8×1.2 and 8×1 .6 where the largest number is the width of the tip and the smallest is the thickness. Tip lengths can vary between 25mm, 50mm, 75mm or 100mm.

Square Screwdriver tip:

Punta destornillador cuadrada

The cases in which we use the square tips will be less compared to the previous options. Square tips are more common for furniture assembly and as its name says it has a square tip shape.

Within the range of Bianditz square screwdriver bits we can find the following sizes of square bits: R1, R2 and R3 with lengths of 25mm and 50mm.

Hex. Screwdriver tip:

Punta destornillador Hexagonal

Hexagon bolts have made their way into the market for automotive mechanics, bicycles, industrial equipment … During the last years. Such keys are also known as allen keys.

Los tornillos con abertura hexagonal se han abierto paso en el mercado de la mecánica automotriz, bicicletas, equipos industriales… durante los últimos años. Dichas llaves también son conocidas como llaves tipo allen.

Within the range of Bianditz professional tools we can find hexagonal bits of the following millimeter bit sizes: Hex 2, Hex 2.5, Hex 3, Hex 4, Hex 5, Hex 6, Hex 8 y Hex 10, and the following inch sizes: Hex 1.5”, Hex 3/8”, Hex 3/32”, Hex 7/32”, Hex 7/64”, Hex 1/8”, Hex9/64”, Hex 3/16” y Hex 1/4”

Hexagonal security bit:

Punta destornillador Hexagonal seguridad

The Hexagonal safety bits are the same as the Hexagonal bits but with the difference that they have a small hole in the center making the manipulation not as easy as a Hexagonal bit to use.

RIBE screwdriver bit:

Punta destornillador Ribe

The RIBE tips are another of the tips that are not very well known on a day-to-day basis. We can say that it is a type of point with a hexagonal shape very similar to the TX point, but with a TX we will not be able to manipulate a RIBE.

Within the range of Bianditz RIBE tips we can find the following models: M5x35mm, M6x35mm, M7x35mm, M8X35, M9X35mm, M10X35mm, M7x72mm y M10x72mm.

Pentalobe screwdriver bit:

The Pentalobe or pentalobular screw is a very special type of screw. We can say that it is a type of security tip that is used to make it difficult for outsiders to manipulate it. This type of screw can be found in some of the technological components of brands such as Apple, Huawei, Toshiba …

Within the range of Bianditz pentalobe tips we can find the TX pentalobe with sizes IPR-10, IPR-15, IPR-20, IPR-25, IPR-30 and and IPR-40 and a single length of 25mm

Spanner screwdriver bits:

Punta destornillador spanner

Spanner tips have a very distinctive shape with two individual tips. In the same way as the pentatobular screwdriver, spanner screwdrivers are used in the world of electronics since, due to their shape, they are difficult to manipulate and provide extra security.

Within the range of Bianditz spanner tips we can find the following: SP4, SP6, SP8 and SP10.

T-set screwdriver bits:

Punta destornillador Tset

T.set screwdrivers have a similar shape to PH screwdrivers but with the peculiarity that the tip of the screwdriver is not T-shaped.

Within the Bianditz T.set range of tips, we can find the following sizes: T.set 2, T.set 3, T.set 4, T.set 5, T.set 6, T.set 8 and T. set 10, with two variable lengths of 25mm and 50mm depending on the model.

T-wing screwdriver bit:

Punta destornillador Twing

T-wing screwdriver bits are also known as triple wing is a tip that we will not find very often, but that does not mean that we will not find them. For example, if we want to disassemble electronic devices such as a Nintendo Wii, we will have to resort to a t-wing type screwdriver tip.

Although it is not a very common tip, within the range of Bianditz T-wing tips we can find the following sizes: T.wing 1, T.wing 2, T.wing 3, T.wing 4, T.wing 5 and T .wing 6.

TX screwdriver bit:

Punta destornillador TX

The TX tips are another of the tips that we can find with some frequency in the assembly and disassembly of computer equipment, electronic devices and mechanical components. It is a very used tip given the resistance they offer when using them.

Given its popularity within the range of TX Bianditz tips we can find the following TX tip models: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 and T45, with lengths that can vary between 25mm, 50mm, 75mm, 100mm and 150mm.

Security TX screwdriver bit:

Punta destornillador TX seguridad

Like the security hex key, the security TX key has a small hole in the center and in this way makes it impossible to use a normal TX key for its manipulation.
The sizes of the TX security tip that we can find in the Bianditz key catalog are: T10, T15, T20, T25, T27, T30 and T40.

XZN screwdriver bit:

Punta destornillador XZN

The XZN tips or also known as spline tips, is a type of tip that we can find in the industrial world.
Within the Bianditz XZN or spline bit catalog we can find the following: M4, M5, M6, M8 and M10.

As can be seen in the catalog of Bianditz screwdriver bits we can find a wide variety of different bits for each of the jobs that we may need in our day to day.

Custom screwdriver bits

If you have a specific need regarding custom screwdriver bits, at Bianditz, as a manufacturer of screwdriver bits, we can help you. We provide custom tools to industries such as automotive, aeronautics, industry in general, electronics … Do not hesitate to contact us.

No Tags

Relatest posts

Leave Comments

Sidebar Right

* ¿Quieres descargar el catálogo de Bianditz?
This is default text for notification bar